CNC machinery fittings processing craft basic characteristics:

In ordinary lathe machining parts, use procedure or process card to each procedure prescribed procedures, according to the provisions on the process card operator "program" machining parts. But in the nc machine machining parts to be processed, the whole process, process parameters and displacement data compiled into a program, and with the form of digital information recorded in control medium (such as punch tape, etc), with disks controlled machine tool, it. Thus, CNC machining process and ordinary machining process in the same basic in principle, but the whole process of nc machining is automatic, so also has its own characteristics.

Either manual or automatic programming ChengQian coils, are programmed to Machinery Fittings  processing parts, technical analysis, choose proper machining tools, cutting dosages. In programming, to some problems (e.g., processing route to knife, etc.) should also do some treatment. So the process programming analysis is a very important work.

1) the more detailed arrangement. This is because in the process of ordinary machine without considering the problems, such as the procedure in the arrangement of knife point, change, the cutting point and processing routes, CNC machining technology in compiling when cannot ignore.

2) process of complex. This is due to the nc machine tools expensive than normal, if only simple processing in the process, so in the nc machine often arrange more complex process, even in ordinary lathe to complete the procedure.